the learning never stops!

Hold Present Position

Gulfstream G450 Instrument Procedures


 

images

Figure: Hold at present position on DU, from Eddie's cockpit.

For a G450 published holding pattern see: G450 Hold as Published.

For holding procedures in general, see: Holding.

The procedure to hold at present position is listed in the operating manual, references shown below. An example follows.

Hold at Present Position Example

images

Figure: MCDU prior to hold pattern, from Eddie's cockpit.

[G450 Aircraft Operating Manual, §2B-27-130, ¶3.B]

  • Push the DIR button.
images

Figure: MCDU PATTERN / INTERCEPT prompts, from Eddie's cockpit.

[G450 Aircraft Operating Manual, §2B-27-130, ¶3.B]

  • Select the PATTERN prompt at 6L. As an alternative, PATTERNS could be selected from the NAV INDEX (page 2).
images

Figure: MCDU PATTERNS page, from Eddie's cockpit.

[G450 Aircraft Operating Manual, §2B-27-130, ¶3.B]

  • Select the HOLD prompt (1L).
images

Figure: *HOLD* prompt in scratch pad, from Eddie's cockpit.

[G450 Aircraft Operating Manual, §2B-27-130, ¶3.B]

  • Push the line select key (1L) of the FROM waypoint (first waypoint on the first page of the ACTIVE FLT PLAN).
images

Figure: MCDU Holding pattern using PPOS page, from Eddie's cockpit.

[G450 Aircraft Operating Manual, §2B-27-130, ¶3.B]

  • The HOLDING PATTERN page with *PPOS (present position) as the holding fix is displayed. Make any necessary changes.
  • Note: Holding at the present position can only be done when LNAV is captured and the cross track error is less than 0.25 NM.

images

Figure: MCDU Holding pattern, from Eddie's cockpit.

[G450 Aircraft Operating Manual, §2B-27-130, ¶3.B]

  • Select ACTIVATE (6R) or CLEAR (6L).

The resulting holding pattern is shown at the top of the page. The "High Holding Grd Spd" message is because we were doing 330 knots at the time.

References

Gulfstream G450 Aircraft Operating Manual, Revision 35, April 30, 2013.

Revision: 20150220
Top